Inspect network cables. Check your router or back-office server connection. Restart the scale.
Press the [ON/OFF] or [POWER] key. The display will run a segment test (all lights flash). After 3-5 seconds, the scale should display 0.000 kg (or your configured unit). If you see an error code, refer to Chapter 6.
Wait for the weight to stabilize (indicated by a stable icon on screen).
Re-thread paper; clean the rubber roller with isopropyl alcohol. Dirty print head or low darkness setting
Inspect network cables. Check your router or back-office server connection. Restart the scale.
Press the [ON/OFF] or [POWER] key. The display will run a segment test (all lights flash). After 3-5 seconds, the scale should display 0.000 kg (or your configured unit). If you see an error code, refer to Chapter 6. digi sm 5000 scale user manual
Wait for the weight to stabilize (indicated by a stable icon on screen). Inspect network cables
Re-thread paper; clean the rubber roller with isopropyl alcohol. Dirty print head or low darkness setting digi sm 5000 scale user manual